Vermont-castings ESSENTIA NV-E6DMS-DC Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Four Vermont-castings ESSENTIA NV-E6DMS-DC. Vermont Castings ESSENTIA NV-E6DMS-DC User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 4
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
Georgian Bay 36/41”
Installation Instructions
Models:
36DVBGTKCB, 36DVBGTKB
41DVBGTKCB, 41DVBGTKB
DVBGTKCB – Classic Black Cast Iron
DVBGTKB – Ebony Black Enameled Cast Iron
The Georgian Bay is designed for use on fireplace mod-
els 36XDV (36”), DV360 (41”) and DVRT41 (41”).
NOTE: Cast iron parts can be heavy, an assistant
would be advisable for this installation.
CAUTION: Porcelain enamel is fragile. The finish can
be easily damaged if castings are not handled carefully.
Always place castings on a protective surface, such as
a towel, blanket or carpet.
Check Contents of Shipping Carton
Compare contents of carton in Figure 1 with actual
parts received. If any parts are missing, or damaged,
contact your local dealer before starting installation.
Contents: (Fig. 1) Top Dome Section, Main Body Sec-
tion, knob extensions (2), Top Heat Deflector, Screws (4)
Tools required: Phillips screwdriver, measuring tape
NOTE: It is our recommendation that you
install the Georgian Trim, if purchased, be-
fore you install the Georgian Bay. This will
help reduce damage to both cast units.
Fireplace Unit Preparation
Before you start your bay installation the fireplace unit
needs to have some items removed. (Fig. 2)
1. Remove the top louvre by gently sliding the louvre
upward and away from the unit.
2. Remove the sheet metal top flange located on the
bottom side of the top louvre opening. You will need
to remove between 2-5 Phillips screws that are hold-
ing the flange in place.
3. Remove the bottom louvre by removing 4 Phillips
screws or by pulling the hair pins that are holding the
hinge pins in place on the unit.



Top Flange
Top
Louvre
Bottom
Louvre
KT696
Fig. 2 Remove the fireplace top and bottom louvre and top
flange.
4. Install the top heat deflector shield by aligning the
holes of the shield with the four (4) inside holes on
the fireplace top flange. Use the four (4) screws sup-
plied to attach the shield to the unit. (Fig. 3)
This completes the fireplace unit preparation.
30003743 5/08 Rev. 1



Top Dome
Section
Main Body
Section
CAR191
Fig. 1 Carton contents.
Knob Extensions
Screws
Top Heat
Deflector
Vue de la page 0
1 2 3 4

Résumé du contenu

Page 1 - Georgian Bay 36/41”

Georgian Bay 36/41”Installation InstructionsModels: 36DVBGTKCB, 36DVBGTKB41DVBGTKCB, 41DVBGTKBDVBGTKCB – Classic Black Cast IronDVBGTKB – Ebony Black

Page 2 - 

230003743Top Edge of Glass Frame AssemblyKT697Fig. 4 Place main body section of bay on top edge of glass frame assembly

Page 3 - Georgian Bay 36”/41”

3300037436. Place the top dome section onto the main body sec-tion by lifting the top dome section over the top edge of the main body section. You wi

Page 4 - CFM Corporation

4300037432695 Meadowvale Blvd. • Mississauga, Ontario, Canada L5N 8A3 800-668-5323 • www.cfmcorp.comCFM CorporationGeorgian Bay 36”/41” (continued)

Commentaires sur ces manuels

Pas de commentaire